How to install sensor faucet?

February 14, 2019

The sensor faucets utilizes the infrared principle. Water is automatically sensed when the hand is placed in the sensing area of the sensor faucet. If the family purchases a sensor faucet, how do you install it? See the installation procedure below.

sensor taps

Sensor faucet installation steps:

1, in the installation of this type of Automatic Sensor Faucets must ensure that the sensor window down and wash basin pedestal at least 25CM, otherwise it will affect the sensitivity of the sensor.

2. The inlet water source of the position where the sensor faucet is to be installed is closed to ensure the installation of the faucet.

3. Take out the faucet body of the Automatic Inductive Faucets from the packaging, wind the faucet body into the water inlet thread with raw material tape or sealing glue, and screw the faucet body into the wall type to install the fixed position of the water inlet pipe.

4. Disassemble the battery box cover on the protruding part of the top cover of the Hand Free Faucets body, carefully pull out the battery box inside, and insert 4 new alkaline batteries of No. 3 in accordance with the positive and negative batteries of the indicating battery. The red light of the sensor window will keep flashing. When the red light of the sensor body on the faucet body is stopped, the red light will be pushed into the battery box and then locked, so that the main body of the faucet is installed.

5. Open the inlet water source where the Automatic Basin Faucets is to be installed, test it, and use the water valve knob to adjust the amount of water. If there is no problem, you can put it into use.

vorig

Neem contact op

Author:

Ms. linly

E-mail:

464021406@qq.com

Phone/WhatsApp:

+8613751081118

populaire producten

Nieuws