Bedrijfsgegevens

SHENZHEN KING OF SUN INDUSTRY CO.,LTD [Guangdong,China] Type Business:Fabrikant , Handelsonderneming belangrijkste Markten: Afrika , Azië , Caribbean , Oost Europa , Europa , Midden-Oosten , Andere markten , West-Europa , Noord-Europa , Wereldwijd Exporteur:81% - 90% certs:ISO9001, CE, Test Report

Taal

Bathroom washbasin faucet installation

April 26, 2019

When we install the wash basin tap in the shower toilet, we must pay attention to measure the installation height of the Basin Mixer. Before installation, the user should personally assume to simulate the wash action, find the height that is most suitable for the faucet installation, and pay attention to the diameter of the outlet and reservation. The height of the nozzle is generally about 35 cm between the lavatory faucet and the basin, and the hot and cold water pipes are separated by a distance of 15 cm. Before installation, flush the water pipe with clean water.When we purchase a Single Lever Basin Tap in a shopping mall, we should pay attention to the diameter of the outlet of the faucet. Generally, the reserved height of the inlet of the hard-pipe inlet is 35 cm. The installation procedure is as follows:

First, remove the Chrome basin faucet and tighten the fastening screw.

Second, screw in the hot and cold water inlet pipes and tighten them. Otherwise, water leakage may occur. If the inlet pipe is too long, it can be cut with a tool and the unwanted pipes cut off.

Then, remove the rubber gasket and the copper gasket, and put the gasket and gasket on it.

Finally, use a fixing nut on the fastening screw and tighten it tightly. It is best to fasten the nut with a dedicated sleeve for dispensing.

vorig

Neem contact op

Author:

Ms. linly

Phone/WhatsApp:

+86 13751081118

populaire producten

Nieuws